We just finished this one from one of my kits. Stocked in a nice piece of
walnut. The stock was one of my seconds as the breech area was cut a little wide
for about 6". I glued in a thin shim along the side of the channel and bedded
the breech area to correct the problem. None of this can be seen until you
remove the barrel. The brass mounts
copied from original pieces in my collection.
The barrel is 42" long, octagon to round in 20 gauge.
(.62 smoothbore) The lock
is by Davis. It is correctly marked with 'London'
on the top of the barrel and View, Proof and barrel maker's stamps on the side
Weight is 7 lbs. and the length of pull is 13 ¾".